Order Firewood & Accessories
Premium kiln-dried firewood delivered directly to your home.
✓ Delivered & Stacked
✓ Kiln-Dried Hardwood
✓ Cleaner, Hotter Fires
✓ Ready to Burn
★ ★ ★ ★ ★
“amazing Quality”
The quality of the wood is amazing! It's easy to carry, unbelievably clean, and burns much hotter then other woods. As long as Fire It Up is in business you will have a customer for life. It's the best wood I have ever seen!
— Dennis (Somers, NY)
Have a Question before you order?
-
Full cord dimensions are 8ft long by 4ft tall by 4ft wide (stacked) 8’x4’x4’
-
1/2 cord dimensions are 4ft long by 4ft tall by 4ft wide wide (stacked) 4’x4’x4’
-
Half Size – Ideal for occasional fires and smaller storage spaces.
Full Size – Best for frequent fireplace users and longer burn seasons.
-
Kiln dried firewood is easier to light and burns cleaner, hotter fires. Here are the facts:
Kiln Dried Firewood: Cut and dried in industrial kilns for 2-3 days at 150-200 degrees, which removes over 1000 lbs. of water per cord!
Cleaner wood, less bark and debris to track into your home.
Can be stored in your garage or basement instead of outside.
Less creosote means less chimney problems and maintenance
Weighs less - much lighter then green or even short term seasoned.
Ignites easily and burns efficiently.
Ready to burn the day it is delivered and available when you need it.
No bugs, pests or critters transported into your home.
Snap, crackle and pop sounds better with milk than wood.
With less moisture in your wood, your fire burns more easily, more efficiently and more safely. Snapping and crackling is water being heated, which can cause more dangerous sparks and sap heat from flames. Some less reputable dealers will mix in seasoned wood. Fire It Up guarantees 100% kiln dried firewood.
Less smoking. Less stoking.
We think fires belong in the hearth, not in the chimney. With less moisture in wood there’s less smoke... which means less creosote. Creosote is the dirty build up of soot that requires regular visits from the chimneysweep. With Fire It Up Kiln Dried Firewood, fires burn hotter and cleaner, down to pure ash, with less stoking for you.
-
Using kiln dired firewood makes building a safe and well-burning fire in a wood-burning fireplace easier... but to avoid backed up smoke and keep those flames burning brighter, follow these ten steps:
First, clean out old ash, then be sure to open the damper — if you have an adjustable flue, open it halfway. Double check to ensure the draft is moving up the chimney so the fire will not be blown out or the room filled with smoke.
Place crumpled newspaper under the grate and place more on top of the grate, with kindling placed gently on top of the crumpled newspaper. (Fire It Up has excellent kindling to really get things going quickly.)
Place some smaller pieces of your kiln dried hardwood on top of the kindling, and get ready to burn, baby, burn! Using a match or lighter, light two pieces of newspaper that are located at opposite ends of each other.
The fire will start to burn the kindling first. After a few minutes, the kiln dried firewood will begin to catch fire. At that point, you can continue to add pieces of hard wood to the fireplace, stacking the wood horizontally in the fireplace, alternating the layers and leaving spaces for air to pass through. (Double check to ensure that the draft is moving up the chimney and if you want a hotter fire, you can close the flue more, but if smoke builds, open 'er up again!
Make sure that the smoke is not black or gray. Black smoke means that the fire is not getting enough oxygen and is producing harmful carbon monoxide and soot. Gray smoke means that the fire is getting too much oxygen.
Remember to play it safe: Keep a pair of fireproof gloves available just in case a burning log falls out of the fireplace and needs urgent attention. Don't place any flammable or plastic objects near the fire and make sure that rugs and carpets are far enough away from the fireplace. If your fireplace has a metal curtain on it, make sure that the curtain is closed and secured once the fire is burning.
Additionally, do not leave a fire unattended or allow children to remain by a fire unsupervised.
To start chillin', first stop adding wood, and let the fire slow on its own. The cooling process for ashes scan take between 10-15 hours so remember that before you try to clean your fireplace. Use a metal scoop and bucket to be safe. And a good tip for the ashes? Dispose of them in an outdoor compost heap.
Close the flue to keep out drafts.
Contact Fire It Up to keep you well stocked with the perfect wood for the perfect fire.
-
$100
-
Yes, please inquire. Email Luke at luke@fireitupfirewood.com or call 203-276-8711